If you want your brick trowel to last, cleaning and maintenance aren't optional-they're a must. I used to skip cleaning mine, and now I have a trowel with rust spots and a dull blade to show for it. So here's how to keep yours in top shape, step by step.
First, clean it right after use. Don't let mortar dry on the blade-it's a nightmare to remove later. When you're done laying bricks, grab a wire brush (the stiff kind) and scrape off all the excess mortar. Start with the blade-scrape both sides, then the edge. Then clean the handle-wipe off any mortar or dirt with a damp cloth. If there's dried mortar (we've all been there), soak the blade in warm water for 10-15 minutes, then scrape it off. Don't use harsh chemicals-water and a wire brush work fine.
Then, dry it thoroughly. This is key, especially for carbon steel. After cleaning, wipe the blade and handle with a dry towel-make sure there's no moisture left. If you leave it wet, carbon steel will rust, and wooden handles will warp. I keep a small towel in my tool bag just for drying my trowel-works like a charm.
Oil the blade regularly. For carbon steel trowels, oiling prevents rust and keeps the blade smooth. Every month (or after every rainy day use), put a few drops of mineral oil or machine oil on a cloth and wipe it over the blade. Don't use too much-just enough to coat the surface. I skip this once, and my trowel got a tiny rust spot-I had to sand it off with fine-grit sandpaper, which was a pain. Stainless steel trowels don't need oil, but a quick wipe with a dry cloth still helps.
Store it properly. Don't throw it in a toolbox with other sharp tools-this can scratch the blade. Hang it up on a hook in your garage, or store it in a separate pouch in your tool bag. If you have a wooden handle, keep it away from damp areas-moisture makes wood splinter. I hang my trowel on a hook by my workbench, and it's still in great shape after 5 years.
And finally, fix small issues early. If you see a tiny rust spot, sand it off right away. If the handle gets loose, tighten the rivets or screws. Small problems turn into big ones fast-don't wait until your trowel is useless to fix it.
Do this, and your trowel will last for years. It's a little extra work, but way better than buying a new trowel every year.
brick trowel from hanke tools











